Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Whats this called in the uk?  (Read 6027 times)

0 Members and 1 Guest are viewing this topic.

RockingDad

  • Guest
Whats this called in the uk?
« on: March 29, 2008, 10:15:58 PM »
Our US friends call this an 'add a fuse'. Anyone seen this available in the uk?
You plug it in a fuse plug and it provide a power feed wi the fuse that was removed being plugged in the top.



RockingDad
Logged

demonicwillow

  • Guest
Re: Whats this called in the uk?
« Reply #1 on: March 29, 2008, 10:39:03 PM »
Quote from: "RockingDad"
Our US friends call this an 'add a fuse'. Anyone seen this available in the uk?
You plug it in a fuse plug and it provide a power feed wi the fuse that was removed being plugged in the top.

RockingDad


http://www.autoelectricsupplies.co.uk/product/715

hope this helps  :-D
Logged

RockingDad

  • Guest
(No subject)
« Reply #2 on: March 29, 2008, 10:50:55 PM »
aaaHA!

surprised at the price.....perhaps I won't be so lazy and find a way into the engine bay from the cabin on GC.

Cheers Demonic


RD
Logged

tim_aka_tim

  • Club Member
  • Forum Member
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 4464
  • Vehicle: Honda Pilot
  • Year: 2008
  • Regional Organiser North America
(No subject)
« Reply #3 on: March 30, 2008, 07:19:11 PM »
What is it you're fitting mate? We may be able to give you somewhere else to get your supply from.
Logged

demonicwillow

  • Guest
(No subject)
« Reply #4 on: March 31, 2008, 06:58:25 AM »
Quote from: "tim_aka_tim"
What is it you're fitting mate? We may be able to give you somewhere else to get your supply from.


My guess is his new cb I reckon :-D
Logged

tim_aka_tim

  • Club Member
  • Forum Member
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 4464
  • Vehicle: Honda Pilot
  • Year: 2008
  • Regional Organiser North America
(No subject)
« Reply #5 on: March 31, 2008, 09:41:34 AM »
That was my immediate thought too. If so, just take it from the back of the stereo and put a 3A (or whatever is supplied) fuse in the way.
Logged

RockingDad

  • Guest
(No subject)
« Reply #6 on: March 31, 2008, 04:41:00 PM »
Quote from: "tim_aka_tim"
That was my immediate thought too. If so, just take it from the back of the stereo and put a 3A (or whatever is supplied) fuse in the way.


Good guess guys! I've mounted the Cb on the back of the centre console. I don't need to see it as it has channel up/down buttons and three programmable buttons on the mic. Whats the best way to the back of the stereo unit and when I pull it out are the pos/neg part of the loom clear or are they a colour coded?

Cheers

RockingDad
Logged

tim_aka_tim

  • Club Member
  • Forum Member
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 4464
  • Vehicle: Honda Pilot
  • Year: 2008
  • Regional Organiser North America
(No subject)
« Reply #7 on: March 31, 2008, 05:11:19 PM »
Never done a ZJ stereo, so don't know, but commonly the batt +ve is the thick red one. To test it, shove a meter in with +ve to the red wire, and -ve to the body. Make sure the ignition is off, if you have 12v (ish) then that's your man. If you wanna double check, then remove the radio fuse and make sure the voltage has gone.
Take a -ve by grounding it to the body. You should find a bolt under the centre console you can use.
Logged

tim_aka_tim

  • Club Member
  • Forum Member
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 4464
  • Vehicle: Honda Pilot
  • Year: 2008
  • Regional Organiser North America
(No subject)
« Reply #8 on: March 31, 2008, 05:22:37 PM »
Just looked at a ZJ radio and it's not immediately apparent how to remove it. The 12v lighter socket isn't live with no ignition on, but it will be fine to use that instead of the radio live (though my CB resets to channel 9 whenever I turn it on, as it has no permanent live).
Logged

RockingDad

  • Guest
(No subject)
« Reply #9 on: March 31, 2008, 10:00:32 PM »
Cheers for checking that out tim. I'm not sure if my unit has a retained memory but is it really an issue?

I may just direct connect to the battery with a switch, I guess there is a disused grommit or something in the bulkhead that I can access.

RockingDad
Logged

tim_aka_tim

  • Club Member
  • Forum Member
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 4464
  • Vehicle: Honda Pilot
  • Year: 2008
  • Regional Organiser North America
(No subject)
« Reply #10 on: March 31, 2008, 10:03:07 PM »
Straight to the battery is fine, just make sure you put a fuse in line.
Logged

The Smiths

  • Forum Member
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 1084
(No subject)
« Reply #11 on: March 31, 2008, 11:24:51 PM »
Look at taking a live feed from under the seats - electric seat feed?.

I found a plug under the carpet on the passenger side and run off that, permanent live 8-)
Logged
If you always do what you have always done You will always get what you have always got
Please give to our Mac4x4 fund: http://www.justgiving.com/The-Smiths-2015

RockingDad

  • Guest
(No subject)
« Reply #12 on: April 02, 2008, 08:00:18 PM »
Quote from: "The Smiths"
Look at taking a live feed from under the seats - electric seat feed?.

I found a plug under the carpet on the passenger side and run off that, permanent live 8-)


Yeah I got leccy seats.....do you get any circuit noise from the alternator or anything? Didn't think about taking live from the seats. Do you know which colour cable under there is the live?

Cheers

Mark
Logged

The Smiths

  • Forum Member
  • *
  • Guru: 1
  • Offline Offline
  • Posts: 1084
(No subject)
« Reply #13 on: April 02, 2008, 08:50:56 PM »
No noise.

Check with a meter (or bulb) 8-)
Logged
If you always do what you have always done You will always get what you have always got
Please give to our Mac4x4 fund: http://www.justgiving.com/The-Smiths-2015
Pages: [1]   Go Up
« previous next »
 
Powered by EzPortal